Surface quality maintenance analysis of busbar processing machine

When we process high hardness or certain structural parts, we need to use the bus processing machine, so the surface quality of the bus processing machine should be maintained. How to maintain it? Please see the following 5 points.

     1. Surface protection should be carried out during processing to avoid damage to the surface; assemblers should wear gloves when installing to prevent fingerprints and stains on the surface.
     2, the copper row should use good materials, the material surface defects are small, the color is even
     3. The copper busbar needs to be straightened. The bending of the wide side of the copper busbar is not more than 2mm per meter, and the curvature of the narrow side is not more than 3mm per meter.
     4. After the copper row is bent, there must be no obvious cracks at the corners.
     5. It is strictly forbidden to fill the copper hole with the same size copper in the hole position for repair.